Thank you for providing that picture and information. The correct lift kit for a 3,000 lb Dexter #10 torsion axle like yours is the # K71-707-01. This comes with all of the necessary hardware and will give you a 2-5/8" lift. view full answer...
Please see the attached image and help article for deterring needed measurements. I suggest you verify the measurements for your specific camper prior to ordering. From what I was able to determine from an online search, your 2013 Rockwood Premier A122BH measures a little over 19' long by 5' tall and 7' wide when closed. The Adco SFS AquaShed Cover for Hi-Lo Travel Trailer, # 290-12252 is for trailers up to 22-1/2' long. The actual dimensions are 270" long x 100" wide x 60" tall.
The... view full answer...
From my research the Rockwood likely has a 3,500 pound axle and therefore uses 10 inch brakes. The 10 inch brake assemblies I recommend for you (And almost always recommend) are # AKEBRK-35-SA. These are self-adjusting so after the original set up they won't need to be adjusted again. Both the left and right hand side are included, and labeled to make installation easier. Also the mounting bolts are included but you'll need the nuts and lock washers, part # BRKH10B.
Our most popular hub... view full answer...
Go To Results